"The campaign isn't spending." It is the most common GMV Max question we get, and the answer is almost never "raise the budget". Spend stalls for eight reasons, and they live in different layers of the account. Check them in this order and you will usually know which one it is in about fifteen minutes.

First, classify the symptom

These four situations look the same in a dashboard and are not the same problem:

  • Never spent at all — from the day it was created, spend is zero. Almost always a setup or eligibility issue.
  • Spent, then stopped — worked for a week, then fell off a cliff. Usually creative exhaustion, stock, or a competitor outbidding you.
  • Spending but far below budget — the campaign is alive but pacing at 10% of what you set.
  • Budget shows fully spent, today's spend is zero — a reporting-window artifact more often than a real stop.

Write down which one you have before touching anything. The fix for each is different, and changing the wrong lever wastes a day of learning.

The check order

1. Authorization and account linkage

Is this ad account the shop's GMV Max primary account? A shop can be connected to several ad accounts; only one is the primary for GMV Max. If the shop was re-bound or migrated between agencies, the designation may have moved and the new account may not be able to take over. Confirm in Seller Center, not in the ads dashboard.

2. Product eligibility

Open the product list inside the campaign. Products drop out silently when images or attributes are incomplete, the category becomes restricted, or stock falls below the threshold. "Purchasable in the shop" is not the test — eligible in GMV Max is.

3. Creative supply

How many videos are actually attached and eligible? Two is not a campaign, it is a test. When a product has fewer than a handful of live creatives, the system runs out of things to show and spend collapses. This is the single most common cause of "it was working last week".

4. Budget and pacing mechanics

Check whether the budget is set at campaign level or ad-group level, whether there is a schedule that excludes the current hours, and whether an end date has already passed. A campaign that shows a budget but stops spending at 2 a.m. is usually a schedule problem, not a delivery problem.

5. ROI target versus market reality

A target set far above what the auction can deliver does not produce a slow campaign — it produces a stopped one. Compare your target with the ROI the account actually achieved in the last 14 days on comparable products. If your target is 40% above that, you are not optimising, you are refusing to bid.

6. Product page and conversion

The system will stop buying traffic to a page that does not convert. Check the funnel: impressions, clicks, add-to-cart, orders. Few clicks means creative; clicks but no carts means price, offer or page; carts but no orders means checkout, shipping or trust.

7. Account health

Review the account health panel. A rejected ad or a policy warning can throttle delivery without obvious notification. Distinguish account-level disablement from a single ad rejection — they need different responses.

8. Competition and seasonality

Same product, same creative, same target, and suddenly CPM is up 40% in the run-up to a platform promo. Nothing is broken; the auction got more expensive. The answer is usually a temporary target adjustment plus fresh creative, not a rebuild.

Three fixes that make it worse

  1. Creating a new campaign every time spend drops. You throw away the learning and reset the model, then repeat the same problem three days later.
  2. Lowering the ROI target and raising the budget at the same time. If it still does not spend, you cannot tell which change helped — and you have doubled your exposure when it does start.
  3. Adding twenty near-identical videos. The system treats them as one creative. You spent production budget and gained no new signal.

When a rebuild is actually correct

Rebuild when the data basis is broken: the campaign was created with the wrong time zone, the shop was migrated, the product changed materially, or the campaign has been paused and restarted so many times that its history no longer describes anything. Otherwise, fix the layer that is blocking and give it three days.

Frequently asked

It says the budget is fully spent but today shows zero. Is it stopped? Check the date range and the reporting window first. A range that crosses the campaign start date mixes days with different statistical windows.

Will a higher budget force delivery? No. If the blocking layer is creative or eligibility, budget only makes the failure more expensive.

Can I test a new creative inside a stalled campaign? You can, but you will not be able to attribute the result. Put the test in a manual campaign, then move the winner in.